BedSlide 1000 Classic Review: Is It Worth It?


BedSlide_1000_Classic_Review

If you use your truck bed pretty often to store cargo, it can be pretty convenient to have a truck bed slide installed. However, there are so many different brands to choose from, and it can be difficult to decide. In addition to getting the right fit, you have to consider other factors like quality and price, so is BedSlide 1000 worth it?

The BedSlide 1000 Classic is a great truck bed slide for the money. It’s well-built, easy to install, long-lasting, convenient, and customizable at a decent price ($1,000). The only downsides are that it holds less weight than other options (<1,000 pounds), and it doesn’t extend very far (75%).

Read on to learn more about the BedSlide 1000 Classic and why it may or may not be the best option for you.

We’re an affiliate
We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!

BedSlide 1000 Classic: Product Overview

The BedSlide 1000 Classic is a well-built product that can make your job a lot easier. While you may love having a lot of space in the back of your truck to store your goods, it can also be a pain to load your stuff and push it to the back, only to have to crawl in and retrieve it later. That can become even more frustrating when you’re using a tonneau cover or a truck cap, which can block off your access to the items back there.

A slide like this one works by converting your truck bed into a big sliding drawer so you’ll have easy access to your stuff. That way, even if your stuff does roll or slide around while you drive, you can easily pull out the whole slide so you can reach it.

You can get the BedSlide 1000 Classic in both black and silver if you want to match it to your vehicle. It also comes in various sizes and fits depending on your type of car and weighs just 137.7 pounds (62.5 kg).

Pros of the BedSlide 1000 Classic

It’s Sturdy and Well-Built

This truck bed slide is made from high-quality materials. The manufacturer BedSlide says that they understand that customers are using their trucks to haul heavy loads, so they expect that the slide may take a lot of abuse over its lifetime. Therefore, they specifically focus on the features that will need to last, including the handle, the latch, the bearings, and the deck.

BedSlide says that the slide’s latch has been cycle-tested to simulate 9000 in and outs with zero defects. The BedSlide 1000 Classic is also equipped with a cam follower bearing rated above your truck’s payload, which has also achieved a zero-defect rate in testing. Additionally, the decking is made from a waterproof composite material, layered with a spray liner to increase the surface’s durability.

It’ll Hold Up for a While

Because it’s built to be strong and durable, you should be able to use this slide for a long time. As we mentioned earlier, although the decking is relatively lightweight, it’s still made to be durable in all types of weather. BedSlide is so confident in this guarantee that a 5-year warranty backs every purchase. However, if you register it within 30 days once you buy it, you can convert that into a lifetime warranty.

Terms of the Warranty

Unfortunately, not every failure will qualify for warranty coverage. According to the BedSlide website, the company will cover the cost of all work related to the repair or replacement of the product for the first year of ownership.

However, damage to the product caused by misuse is typically not covered. 

For example, if you exceed the weight capacity rating, cause the frame to corrode by exposing it to the elements, or damage it by spilling liquid on the surface, you won’t be able to use the warranty to cover repairs. Additionally, the warranty only applies to the original owner, so you won’t be able to qualify for it if you buy the product used or from an unauthorized seller.

It’s Relatively Easy To Install

Most customers say that assembly and installation for the BedSlide 1000 Classic are pretty quick and simple. BedSlide estimates that it takes most owners anywhere from 30 minutes to an hour once it’s unboxed and in a prepared work environment. The assembly and installation instructions are included in the package, but you can also find them online.

Assembly

The box comes with almost all of the hardware you need for assembly, including:

  • (14) ¼-20 Allen head bolts
  • (18) UHMW mount blocks, (4) D-ring tie-downs
  • (2) corner towers
  • (2) side towers
  • (1) headrail
  • (2) side rails

However, it also requires an Allen head wrench, which is not included in the package. If you don’t have one yet, we’d recommend this Owl Tools Allen Wrench Set.

Installation

When it comes to installation, you’ll also get most of the materials required, including:

  • (4) 5/16 riv nuts
  • (1) riv nut tool
  • (4) 5/16 x 2″ hex head bolts
  • (4) 5/16 split lock washers
  • (4) ⅜ flat washers

However, you’ll still need to gather a few of your own tools, including:

  • Drill
  • ½” drill bit
  • Sharpie
  • Tape measure
  • ½” socket
  • Ratchet
  • ½” open-end wrench

Many customers say that the included instructions are relatively easy to follow. However, if you’d like a step-by-step walkthrough to make it quicker, we’d recommend watching this detailed 35-minute video about how to install the BedSlide 1000 Classic:

It’s Simple and Convenient To Use

Once you’ve assembled and installed this truck bed slide, it’s pretty easy to use for your everyday needs. It’s equipped with a long, sturdy handle so you can slide it in and out smoothly. Since it doesn’t require much force to push and pull, it’s accessible for many users.

The slide also extends to 75% of your truck bed length, meaning you can get easy access to almost all of your stuff. Additionally, as you pull it out, it locks in multiple different points for added safety.

It’ll Keep Your Stuff in Place

One of the most frustrating parts of transporting cargo in your truck is finding it in a jumbled mess once you get to your destination. Moreover, if you’re trying to move something delicate or breakable, you might have to spend a lot of time padding it or tying it down to make sure it’s secure. Fortunately, the BedSlide 1000 Classic comes with T-slot perimeter bed tracks around the sides with D-ring tie-downs.

You can place them in any position, so you can use a bungee or a tie-down to strap down anything that you don’t want to shift while you’re driving. On top of that, the surface is coated with a non-skid spray liner that grips your items to keep them in place.

If you’re interested in purchasing some tie-downs to secure your stuff while you’re using a truck bed slide, we’d recommend the AUGO Ratchet Tie Down Straps.

It’s Customizable

While a truck bed slide is a great feature for your vehicle, it’s not the only option out there. You might also be considering some other space-saving solutions like drawers or shelves. With this product, you don’t have to choose one or the other. The BedSlide 1000 Classic is designed to accommodate upgrades so that you can add new features at any point down the line.

We’ll go over some of the products that you can add to your BedSlide if you’re looking for an upgrade later on.

BedSlide BedBin Side Kix

These 7″ x44″ (17.8 x 111.8 cm) bins can be installed on each side of the BedSlide. The bins sit taller than the guardrails over the wheel wells to maximize the use of space in your truck bed. They’re made from aluminum, composite, and all-weather soft surfaces to resist the elements. These side bins can come in handy, especially for those who want easy access to their items and additional stability and containment from the higher walls.

BedSlide BedBin Mixi Kix

These 7″ x18″ (17.8 x 45.7 cm) bins can be added to each side of the BedSlide. Unlike the Side Kix, the mini BedBins sit on top of the BedTrax, more or less in line with the guardrails. Many people may be concerned about accessories taking up too much space on the truck bed. However, the Mini Kix slides right in between the end of your truck bed and in front of the wheel wells, so they don’t waste any space on top of the bed slide itself.

They’re also made from aluminum, composite, and all-weather soft surfaces. They can come in handy for holding small items like tools, cords, and even a small gallon of paint.

BedSlide BedBin Deck Divider

This 7″ x44″ (17.8 x 111.8 cm) bin can be placed anywhere on your BedSlide deck. Unlike the side and mini kix, it doesn’t require or allow for any permanent installation. It sits loosely on the deck with a non-skid pad to allow you to wedge items into a location. You can use it to create a barrier that prevents some of your cargo from sliding to the back. It also can be used to hold smaller items for added organization.

One of the main benefits of this add-on is that it doesn’t require installation. Therefore, it’s easy to use at a moment’s notice, and you can preserve the versatility of your truck bed by removing it as soon as you’re done.

BedSlide BedBin Upper Tray

This upper BedBin comes in two sizes: 16”x 48” (40.6 x 121.9 cm) and 16”x58” (40.6 x 147.3 cm). The two versions are virtually the same, aside from the larger one being priced slightly higher.

This add-on mounts above your truck bed slide to provide added storage for smaller items without taking up any extra floor space. It can be especially useful if you often find yourself running out of floor space but having plenty of vertical room. The company BedSlide recommends that customers measure their rail length if they plan to install an upper tray onto a truck bed slide that already has side BedBins.

BedSlide Bottle Opener

While this feature won’t increase your storage space, it can be a fun addition to your truck. This bottle opener can be easily installed onto the side of your BedSlide, so you don’t have to worry about carrying around your own.

It’s Affordable

One of the biggest reasons that the BedSlide 1000 Classic is well worth the money is that it’s pretty reasonably priced. When shopping for a truck bed slide, you can expect to spend anywhere from around $1000 to over $2000. This product falls on the lower end of that spectrum, giving you a high-quality slide at an accessible price.

Potential Downsides of the BedSlide 1000 Classic

While this product gives you plenty to rave about, it also has its share of drawbacks.

It Doesn’t Hold As Much Weight As Other Truck Bed Slides

Although 1000 pounds (453.6 kg) is a hefty load, many commercial users may need to go all the way up to twice that, or even more. Even if you’re only planning to go slightly over the weight limit, you probably shouldn’t test your luck. When tested to its limits, the BedSlide 1000 Classic gave signs of strain at full capacity, including popping and breaking plastic sounds. At 1075 pounds (487.6 kg), it had a complete failure.

Since the warranty doesn’t cover any damage due to loading your vehicle past the weight capacity, you don’t want to risk piling it up too much. You’ll also want to try to evenly distribute the weight when you’re getting close to the limit, per the manufacturer’s suggestion.

Fortunately, if the weight limit is the only aspect of this product that doesn’t fit your needs, you can opt for the BedSlide 2000 Classic. It offers all of the same benefits as this one, plus it holds up to 2000 pounds (907.2 kg). It does come with the tradeoff of a higher price tag, but it’s still a good price compared to other slides with its weight grade.

It Only Extends to 75%

Whereas many truck bed slides may be able to pull out to 100% of their length, this one only gives you access to ¾ of your truck bed. While this extension is probably sufficient for most users, it may make it harder to reach some of your stuff farther toward the back of the bed. Therefore, if you know you’re going to be loading up your truck bed and don’t want to stretch to retrieve the last few items, this might not be the best choice for you.

Frequently Asked Questions

Can I Order Individual Parts for My BedSlide?

Yes. If you want to order parts, you can email the company at support@bedslide.com.

Why Does the BedSlide Have a Slight Upward Angle?

When you install your BedSlide, you might notice that it angles up toward the end. That upward angle is called a rake, and the product includes it to counteract the deflection that occurs once the slide is weighed down. However, the deflection that each bed slide experiences vary by size.

Can I Install a BedSlide in a Truck Bed With a Liner or a Mat?

According to the company BedSlide, fitment and installation are based on factory truck beds. Therefore, additional truck bed accessories like liners may affect the installation or fitment of your BedSlide. For that reason, it’s recommended that you consult a dealer if you already have other features installed in your bed.

What if My BedSlide Gets Damaged in Shipping?

When you order heavy, bulky items like truck bed slides, shipping damage is a very possible and serious issue. Many truck accessory customers report their goods being dented and dinged during transit.

If your BedSlide 1000 Classic arrives with obvious shipping damage, the manufacturer recommends that you reduce the delivery. However, if you are unable to, or if you don’t notice the damage until after you’ve already opened the box, there’s no need to panic. You can call the fulfiller using the contact information included with the order.

If you think that shipping damage might be an issue, make sure that you save all of your packaging material and paperwork for the order. If you throw away any of the packaging material or try to return it without contacting the fulfiller, BedSlide may not be able to make a claim, and you may not receive credit for the return.

How Do I Make a Warranty Claim?

With the 5-year to lifetime warranty that the manufacturer BedSlide promises, you must know how to get your repairs covered. The company website advises customers to contact the authorized BedSlide dealer they purchased from if it fails.

You’ll need to provide the following pieces of information so they can process the claim:

  • BedSlide serial number
  • Valid proof of purchase
    • Must confirm the date of purchase for warranty coverage
    • Must confirm that you purchased from an unauthorized BedSlide dealer
  • Images of the damaged parts or components
    • The picture must help the manufacturer to determine the cause of the problem or damage
    • The picture must help the manufacturer to identify your specific product for repairs or replacement parts
  • Contact info
    • Contact name
    • Phone number

Once your proof of purchase and product images have been processed, someone from the company BedSlide will email or call you within 24 hours to confirm that your product issue is covered under the warranty policy. Once the coverage is confirmed, they’ll ship the replacement parts to the authorized dealer. However, if you’re repairing it on your own, they can send the parts directly to you instead.

Should You Get a Truck Bed Slide?

Truck bed slides, in general, can be huge energy and time savers. If you’re debating whether it’s the right solution for you, you can consider it compared to other storage solutions, like shelving units and drawer systems. If you’re more concerned with keeping your stuff organized, you might want to opt for a customized system instead. However, if making your truck bed more accessible while keeping it versatile is a priority for you, a slide is a great option.

This product is also a great choice for those who use truck caps or tonneau covers to shield their cargo from rough conditions. Since the BedSlide is quick and simple to operate, it makes it easier to access your stuff without having to climb into your truck bed every time. Not only will it save you time and effort, but it can also prevent you from straining your back or pulling a muscle during unloading.

What if This Isn’t the Product for Me?

Even if the BedSlide 1000 fulfills all of your needs, it’s still possible that it’s not the right choice for you. Because it needs to fit snugly in your truck bed, you’ll have to buy the particular BedSlide that’s made for the same year, make, and model as your vehicle. Both Amazon and the BedSlide website have features that make it easy to find the right one for your truck, but there’s no guarantee that the product comes in the dimensions you need.

If you don’t end up getting the BedSlide 1000 Classic, there are plenty of other solutions that could work for you. We’ll go over some of the main alternatives that we’d recommend.

CargoGlide CG1000XL

If you want full extension, one option is the CargoGlide CG1000XL, which has the same weight capacity and slides out all the way to 100%. However, at 266 pounds (120.7 kg) for a product with similar dimensions, it weighs significantly more than the BedSlide version, which can lower fuel efficiency and make installation a little trickier. It’s also quite a bit pricier.

Cargo Ease Dual Slide

If you’re open to a slightly different style and want more versatility, you might want to think about getting the Cargo Ease Dual Slide, which holds 1200 pounds (544.3 kg) and is split into two separate sliding pieces. Many find that it’s more manageable than a single-piece slide. However, it also extends to only 75%, and it typically costs about twice as much as the BedSlide 1000 Classic.

Cargo Ease Base Locker

Alternatively, if you’re not that excited about truck bed slides in general, you can check out truck drawers instead. We’d recommend this Cargo Ease Base Locker in particular. While this is a much pricier option than most slides, it may be worth the money depending on your needs. In addition to holding up to 2000 pounds (907.2 kg), it’s also water-resistant and conveniently fits on top of the base of your truck bed to preserve your floor space.

The base locker is especially useful for those who have many supplies that they’d like to keep organized in the back of their truck. Similar to the BedSlide 1000 Classic, you can add a lot of features to this product as well, including dividers, a slide mounting bracket, a spare tire lift, and automotive-grade carpet.

How To Build Your Own Truck Bed Slide

If you have trouble accessing your cargo but don’t have the budget for a truck bed slide, you can try to build one yourself. Many truck drivers report that it’s not too difficult and much more affordable. Many recommend starting with a plywood base that fits the dimensions of your truck bed. From there, you can add borders, rails, and wheels on the bottom to allow it to roll smoothly.

The main downside of building your own slide, aside from the added time and work, is that its quality is limited by your woodworking skills. Unless you’re a pro, your slide probably won’t have nearly as many features as those on the market. Aside from being less convenient, this may lead you to run into some safety concerns. For example, you’ll need to be careful about accessing your truck bed while your car is parked uphill, as it could be difficult to get closed.

Despite the potential drawbacks, a homemade slide may still fit most, if not all, of your needs at a fraction of the cost.

If you’d like to learn more about how to make one, we’d recommend watching this 6-minute YouTube video about building a simple DIY truck bed slide out of a hardboard:

Final Thoughts

The BedSlide 1000 Classic is a durable, easy-to-use, and affordable choice for a truck bed slide. It’s sturdy, simple to put together, and it’s compatible with a wide variety of accessories if you want to upgrade it later on. However, it also doesn’t hold as much weight as other options on the market, and it only pulls out 75% of the way.

Overall, it’s a great option for those who want a truck bed slide for everyday use. It’s easy to use with a tonneau cover, and it can save a lot of effort when loading and unloading your truck.

Sources

Recent Posts