We’re an affiliate
We hope you love the products we recommend! Just so you know, we may collect a share of sales or other compensation from the links on this page. Thank you if you use our links, we really appreciate it!
If you have a truck, odds are that you’re probably putting your extra storage to good use. Whether it’s through camping, fishing, construction, or just helping friends move, your truck bed can really come in handy when you need some extra space. However, when you’re carrying smaller objects like tools or supplies, it can be helpful to get a truck toolbox with drawers to help you organize them.
The best truck side mount toolbox with drawers is the Brute Pro-Series TopSider with Drawer Tool Boxes. It’s made from sturdy, thick aluminum with secure stainless steel folding and locking mechanisms to ensure safety. On top of that, its rubber seal protects its contents from water, dust, or dirt.
However, this box runs a pretty high price tag and may fall outside some customers’ budgets. Additionally, the right truck toolbox for you may depend on your situation, including your vehicle and your personal preferences. Read on to learn about what to look for in a truck tool box and check out our top recommendations to fit your needs.
Table of Contents
What To Look For in a Truck Toolbox
For many, when you’re trying to find the best tool box for your truck, you’ll want to decide on a few things you’re looking for beforehand:
If you’re just starting your search, it can be overwhelming to take all of these areas into account. We’ll go into each of these qualities in more detail to give you some guidance on how to make your choices.
There are so many different types of truck tool boxes out there; it’s hard not to get overwhelmed by all of the options. Luckily, many designs, including crossover and side mount boxes, don’t currently offer models with drawers. Therefore, for now, we’ll just focus on the types that do.
Wheel Well Tool Boxes
These storage compartments are side mount boxes that attach to the floor of your vehicle. They either sit behind or curve around the rear wheel well. Some types can also swing on the hinges for easier access from behind.
Since they adjust to the truck bed walls’ uneven design, wheel well boxes can save a lot of space. However, they also may need to be measured more carefully than other truck tool boxes because of their precise fitting.
Top Mount Tool Boxes
Top mount boxes can be attached to the top of your truck’s side bed rails. In other words, rather than sitting on the floor of your truck bed, they extend upwards. This design allows drivers to access the box’s contents from around the side of the truck without having to climb up into the bed, which many prefer. Additionally, since your tool box isn’t taking up any room in the bed, you can pack your truck full without taking away any space from your tools.
However, one downside of top mount boxes is that they may create blind spots for the driver. Therefore, you might want to keep in mind that risk when deciding where to mount them during installation.
Underbody Tool Boxes
Unlike wheel well and top mount tool boxes, which attach to the top of your truck, underbody boxes can be mounted under the frame of your vehicle. The door will typically face the side or the back of your truck, which means that you can easily access it from outside. On top of that, they can save you a lot of space by adding on to the bottom of your truck, so your truck bed is free to accommodate anything you need, from cargo to more storage boxes.
Unfortunately, while underbody tool boxes can be a great, convenient option, they’re not typically suited to pickup trucks that don’t have a lot of ground clearance. Still, if you drive a semi-truck or a trailer, it can be a good addition to look out for.
Unlike many truck tool boxes, storage drawers are designed almost solely to hold your tools and smaller materials. You can install them directly on the floor of the truck bed, and they’re often versatile enough to fit a variety of surfaces, including vans, trailers, or workbenches.
One potential downside of storage drawers is that they’re typically too shallow to fit larger items. Therefore, they might not be a great fit if you have a lot of power tools or bulky equipment that you’d like to keep in your tool box. However, on the other hand, they’re often small enough to fit in your trunk or truck bed without getting in the way or hindering visibility.
Your truck tool box’s material will be a major determinant of its durability, among other things. It’s important to think about what you need based on your lifestyle and preferences. Typically more durable materials will be heavier and more expensive than others. Therefore, you’ll want to take into consideration whether your need for robust material warrants that tradeoff.
For example, if you live in a mild climate where it rarely rains or snows, you may not have to worry about rust and corrosion as much as someone who lives in an environment with lots of rainfall. Alternatively, while you may want a heavy-duty box, it may not be worth the added cost of reducing your vehicle’s fuel efficiency because of the extra weight. Keeping that in mind, you’ll want to think about durability as one factor when considering which material to pick.
- Aluminum: Aluminum is a pretty common material found in many truck tool boxes. It’s relatively lightweight and resistant to rust. It’s also quite strong and doesn’t deteriorate much over time.
- Steel: Even more common than aluminum, steel is a heavy-duty and durable material. It’s tougher than aluminum and therefore more resistant to dents. However, its strength also makes it heavier, especially along with the powder coat that many steel boxes have to prevent corrosion.
- Plastic: Plastic truck tool boxes aren’t quite as common as their aluminum and steel counterparts. However, they’re often much more lightweight and cheaper, which appeals to many truck owners. They’re a little bit less durable than metal boxes, although still pretty strong nonetheless.
Sizing is one of the most important qualities when buying a truck tool box. If the box doesn’t fit perfectly in your truck, you’re not going to be able to use it. While some models are vehicle-specific, for others, you can find dimensions to see if it can fit in your truck.
Before purchasing your tool box, you’ll want to take thorough measurements of your vehicle. Most of the time, it would be ideal to buy your truck tool box in person so that you can fit it on the spot. However, if that’s not possible, you can definitely figure out the dimensions on your own and keep them in mind during your search.
If you need help figuring out how to measure your truck bed, we’d recommend watching this 2-minute video:
When purchasing a truck tool box, be prepared to make a significant financial investment, as prices typically range from around $100 to over $1000. Usually, boxes with added features like drawers will cost more than average. However, it’s important to resist immediately going for the cheapest option. For the most part, you get what you pay for, and cutting corners could mean getting a box that corrodes quickly or falls apart if you hit a bump in the road.
On the other hand, pricier doesn’t always mean better, so it’s important to look at other factors like material and design before taking price into consideration. Still, it’s a good idea to have an ideal budget in mind beforehand, so you know which options are on the table for you.
When choosing which type of truck tool box you’d like, you’ll want to think about how frequently you need to access your tools. You might need to weigh this against other preferences to decide how big of a priority it is. For example, a top mount tool box can make access very convenient, but it also might get in the way of your driving. On the other hand, you can get a box that sits on top of your truck bed, out of sight, but you’ll have to climb inside every time you need a tool.
For this reason, you’ll need to consider the pros and cons of each setup so you can figure out what works best for you.
This top mount tool box is a great choice for anyone who wants a basic storage option with drawers. It’s made by Brute, a subsidiary of the leading truck product manufacturer Westin Automotive. It’s also made domestically in the USA, which many customers find to be a testament to its quality.
The Pro-Series TopSider is made from the 0.063-inch aluminum diamond tread, along with 0.080-inch aluminum reinforcement throughout. It’s designed for flat/stake beds and comes in two colors: aluminum and textured black. It also comes in a wide range of lengths, from 48” (121.9 cm) to 96” (243.8 cm), which makes it a versatile option for all kinds of truck owners.
This box also comes with secure folding locking T-handles made from stainless steel, as well as a weather-resistant rain gutter design. Because aluminum and stainless steel are both resistant to corrosion, this product is built to last against harsh conditions and rough weather.
The upper part of the tool box contains a reinforced top shelf to carry the load, while the bottom contains drawers with organizers. Many reviewers say that the drawers open and close smoothly, but some have issues with items getting wedged in the latch, making it difficult to unlock and open.
Several customers also say that the box is sturdy and of good quality. One reviewer mounted e-clip rails to allow tie-downs to secure its back, which they found to be effective. However, some have experienced shipping problems, finding dents and damage on their box after receiving it in the mail. For that reason, it might be a good idea to find an option that will allow you to pick it up in person to avoid shipping.
|Weight||Varies by length|
|Dimensions||Vary by length|
This wheel well tool box is manufactured by UWS, a subsidiary of Lippert Components, Inc. It offers additional storage by integrating with your fender wheel wells, meaning that you don’t need to give up much space to install it.
The box accommodates two compartments– an open space at the top and a bottom part containing three drawers locked behind a securely locked rear door. It features a RigidCore lid, which is made up of a solid foam sandwiched between two sheets of aluminum. This UWS-patented technology maximizes structural integrity and helps prevent warping and bending. It also makes the box more pleasant to use with smooth opening and closing.
The lid also has a MicroSeal gasket, which prevents moisture, dust, dirt, and insects from getting inside. On top of that, it opens a full 90° to allow easy access no matter where you open it from.
The box is made from extra-sturdy aluminum with a 0.058-inch thickness, which UWS ensures will provide superior strength. The lid and doors also come equipped with lockable stainless steel handles to keep your possessions safe while resisting rust. You can open the box from outside your truck, but since the drawers open to the rear, you’ll have to go around the back to access them. This design is also available for both the driver and passenger sides.
|Weight||36.2 lbs (16.42 kg)|
|Dimensions||47.88” x 24.63” x 8.75” (121.6 x 62.5 x 22.2 cm)|
Similar to the Brute Pro-Series TopSider, this truck tool box mounts to the top of your side bed rails for easy access from outside your vehicle. It was made by Buyers Products, a manufacturing company founded in 1946 that’s now a leader in the truck equipment industry.
It’s a pretty simple design, with a spacious upper compartment covered by a hinged flip-up door, as well as lower drawers. If you didn’t need the drawers, you could opt instead for a version with a drop door instead, which is also considerably cheaper. It’s also available in three lengths to adapt to several truck sizes: 72-in (182.9 cm), 88-in (223.5 cm), and 96-in (243.8 cm).
This product is built to last with 0.056-inch aluminum construction and a black powder-coated diamond tread finish. The aluminum material makes it lightweight and corrosion-resistant. It also shuts out harsh weather conditions and boosts security with locking, stainless steel compression latches. In addition to features like aircraft-grade cables and a replaceable gasket sealing system, the box also comes with included mounting hardware for easy installation.
|Weight||Varies by length|
|Dimensions (1)||13.5” x 72” x 21” (34.3 x 182.9 x 53.3 cm)|
|Dimensions (2)||13.5” x 88” x 21” (34.3 x 223.5 x 53.3 cm)|
|Dimensions (3)||13.5” x 96” x 21” (34.3 x 243.8 x 53.3 cm)|
This storage box is a compact choice for anyone who needs a place to hold their smaller tools. Made in the USA by UWS, this tool box is a one-piece box made from welded 0.058 aluminum, making it extremely durable and resistant to rough conditions. It also comes with a lockable stainless steel handle that resists rust and ensures security and durability.
On the inside, the box contains five drawers for organizing small tools. Each drawer is made from commercial-grade injected plastic. All five of them roll on drawer slides with stainless steel ball bearings, which UWS claims will ensure smooth operation over a long life.
As a simple compact unit, the heavy-wall aluminum truck bed tool box is pretty easy to install. You can mount it on a variety of surfaces, including your truck bed, a cargo van bed, your garage, or wherever you need additional storage. The door also has a proprietary MicroSeal gasket that prevents moisture, dust, dirt, and insects from getting inside the box.
The box is available in multiple sizes, so you’re sure to find a model that fits your vehicle and needs.
|Weight||34 lbs (15.4 kg)|
|Dimensions||27” x 22” x 12” (68.6 x 55.9 x 30.5 cm)|
This box is pretty similar to the heavy-wall aluminum truck bed tool box from UWS. However, there are a few key differences. Aside from the product being made from a different manufacturer, it’s also slightly more compact and made from steel with a durable powder-coat finish. Because of its size and dimensions, it’s conveniently compatible with bed liners, Tonneau covers, and bed caps.
This set of storage drawers is made to withstand harsh conditions with its tough steel exterior. It also comes with mounting hardware included, along with a quick-release base that allows the tool box to be easily removed when you need more truck bed space. While some reviewers report having difficulty figuring out the release mechanism at first, many say that it’s pretty easy and convenient once you get the hang of it.
Its lockable drop-down front door covers three drawers on the bottom, along with two smaller drawers on top, for secure storage. Inside the box, each drawer rolls smoothly on top of easy-glide bearing sliders. Additionally, unlike many tool box drawers, they’re also made from steel, making them sturdy and long-lasting.
|Weight||20 lbs (9.1 kg)|
|Dimensions||21” x 10.34” x 22.6” (55.9 x 26.3 x 57.4 cm)|
This wheel well storage drawer by MobileStrong fits into your truck bed even more snugly than most wheel well tool boxes. Instead of just resting on top of the wheel well, this product wraps around for a more precise fit. Inside the box, it has two drawers– a full-length one and a shorter one, each secure with key locks. The top drawer opens 44-in (111.8 cm) and holds up to 250 lbs (113.4 kg), and the bottom opens 13.5-in (34.3 cm) and holds up to 100 lbs (45.4 kg).
It’s designed primarily to fit full-size pickup truck models, but the manufacturer advises that you should still measure your vehicle to make sure that it fits. People use this storage drawer for a wide variety of uses, including a tackle box or a gun vault for hunters.
The box is made from high-density polyethylene (HDPE), plus rubber on top. While it’s not entirely waterproof, it’s still water-resistant and protects against weather conditions, especially because the top and side panels are all in one piece.
|Dimensions||12.5” x 59.5” x 19” (31.8 x 151.1 x 48.3 cm)|
This truck tool box has a pretty different design than the other options on this list. As an underbody box, it’ll fit discreetly underneath your truck’s frame. This can make for quick and easy access from outside the vehicle. However, as mentioned earlier, it may not be an option for cars underneath a certain height.
This box is built with a durable, corrosion-resistant, 0.100-in thick diamond tread aluminum that allows it to resist rough weather. The top part contains a slide-out drawer with adjustable dividers to hold your tools in place. Underneath that, the drop-down door allows space for any slightly larger items you might need to store.
The box’s locking, die-cast compression latch system guards your tools against theft, and the bolt-on stainless steel continuous hidden hinge resists rust over time. It also comes with aircraft-grade cables and a watertight gasket system. However, the mounting brackets that it requires to be attached to the vehicle are sold separately.
Many reviewers seem to enjoy this product, saying that it’s sturdy and has ample drawer space. However, some say that they had issues with the box getting damaged during shipping. For that reason, it may be a good idea to try to seek out a store selling this product as well if you decide to get it.
|Dimensions||12.5” x 59.5” x 19” (31.8 x 151.1 x 48.3 cm)|
This wheel well tool box, similar to the UWS version, sits against the wall of the truck bed with its upper half resting on top of the wheel well. Its wrap-around fit can save you space in your truck by taking up as little room on the bed as possible.
Since this one also sits below the bed rails, it’s compatible with Tonneau covers. This positioning may make it a little bit harder to access from the outside, but it also comes with an easy-to-use paddle handle and a self-rising gas spring so you can open it with one hand. Its self-adjusting strikers also help you close it securely.
The box has a full seal weather stripping and fully welded seams to protect its contents from water, dust, and dirt. Its body and drawers are made from aluminum, making the entire product sturdy and corrosion-resistant. However, since it only has two drawers, it may not be the best choice for those who have a lot of tools that they’d like to store separately.
|Weight||49 lbs (22.2 kg)|
|Dimensions||52.3” x 9.3” x 19” (132.8 x 23.6 x 48.3 cm)|
Like the Buyers Products version, this underbody tool box is a great option for those who want to keep their tools stowed underneath their vehicle. The only difference is that this one has a slightly lighter body, made from a 0.063-in aluminum diamond tread.
Its folding and locking T-handles are made from secure stainless steel, which keeps them shiny and rust-resistant. The box also has a weather-resistant gutter design to protect your tools from water and rough conditions. Additionally, unlike the Buyers Products underbody tool tox, this one comes with installation hardware and instructions for added value and convenience.
|Weight||45 lbs (20.4 kg)|
|Dimensions||51” x 22” x 19” (129.5 x 55.9 x 48.3 cm)|
If you’re in the market for a side mount truck tool box with drawers, the Brute Pro-Series TopSider with Drawer Tool Boxes is probably your best bet. It’s made with sturdy aluminum and weather-resisting features, as well as secure locks. On top of that, it’s available in a wide variety of sizes and colors to fit a range of needs and preferences.
However, it’s important that you consider all of your options to figure out which box fits best to your design, material, sizing, price, and accessibility needs. Good luck with your search!
- YouTube: How to measure your truck bed
- Westin Automotive: Home
- Lippert Components: Home
- MobileStrong: Home
- Wikipedia: High-density polyethylene
- Mobile Strong: Wheel Well Tool Box Drawers
- Better Built: Wheel Well Truck Box
- Westin: Brute TopSide w/ Drawer Tool Boxes
- Northern Tool + Equipment: Iron Sidebed Storage Drawer Truck Tool Box
- UWS: Gloss Black Aluminum 48” Driver-Side Wheel Well Tool Box
- UWS: Bright Aluminum 22” Drawer Truck Tool Box
- Home Stratosphere: 12 Types of Truck Boxes for Tool Storage
- Go Share: The best truck tool boxes for your pickup truck
- Driving Life: Best truck tool box: Keep your tools safe while on the road
- Billy Boxes: Ideas for what to keep in a truck bed toolbox
- Your Mechanic: How to buy a good quality truck tool box
- Damn Tools: What are truck tool boxes and why do I need them?